FoxSDR Download free
Download

Pick your computer.

Free for hobby use. No account, no key, no activation.

New to FoxSDR? Start here Get FoxSDR from the Microsoft Store Version 0.99.101 · signed by Microsoft

The same application, packaged for the Microsoft Store and signed by Microsoft: it installs, updates and uninstalls through the Store like anything else on your machine, with no security warning to click past and nothing to keep an eye on afterwards. This is the one to take if you are new to FoxSDR. Its only cost is time: every Store update waits for Microsoft's certification, so the Store copy can trail this page — it is on 0.99.101 while the installer below is 0.99.109.

Newest Windows installer 0.99.109 · 43.0 MB Daily build. Unsigned, so Windows will warn you. Download → For testers Linux 0.99.103 · 8.9 MB AppImage, 8.6 MB tarball Not yet tried with a real radio. Download → For testers Raspberry Pi 0.99.103 · 8.4 MB AppImage, 8.1 MB tarball Pi 3 and earlier are not supported. Not yet tried with a real radio. Download → Early alpha Android 0.98.1 alpha 4 · 6.7 MB Has only run in an emulator so far. Sideload the APK →

Before you run it

SmartScreen will warn you

The installer is not code-signed. Windows will show a blue warning: choose More info, then Run anyway. Check the SHA-256 above against the file if you want certainty rather than a signature.

Which radios need a separate install

None for an RTL-SDR, a HackRF, an Airspy R2/Mini, an Airspy HF+, a Mirics dongle or an RX888 mk2: FoxSDR drives them itself over Windows’ own WinUSB. An SDRplay RSP needs SDRplay’s own API, version 3.07 or newer. An ADALM-Pluto is reached over the network, with nothing to install.

An RTL-SDR’s driver takes one click

Windows binds its own driver to a dongle first, which hides it from every SDR program. In FoxSDR’s RADIO SETUP page, press INSTALL DRIVER under the dongle. After one Windows permission prompt it has WinUSB, which is what FoxSDR opens.

No radio showing up?

Press Refresh in the Source dropdown after plugging the radio in or installing drivers. FoxSDR looks for devices on demand, not only at launch.

Linux

The same source, built for x86-64 Linux. It builds and passes its 173 tests there, and its native drivers reach the radio through the kernel's own usbfs interface, but no radio has yet been driven through it on a Linux machine. Take it to find out what is broken, not to use as a receiver. Both files need SoapySDR, OpenSSL, ALSA and OpenGL from your distribution (libsoapysdr0.8 libssl3 libasound2 on Ubuntu); the tarball carries the udev rule and the notes on installing it, and the AppImage runs without FUSE with APPIMAGE_EXTRACT_AND_RUN=1.

Raspberry Pi

The same source, cross-built for 64-bit Arm Linux (aarch64) by its own CI job on GitHub's hosted Arm64 runner, passing the same 173 tests there under Xvfb. One AppImage and one tarball cover every current 64-bit Raspberry Pi — there is no separate download per model. No Raspberry Pi has run this build, and unlike the x86-64 Linux build above, whether its window even opens is not yet settled either: FoxSDR asks for an OpenGL context without requesting a version and initialises its interface for OpenGL 3.0 (GLSL “#version 130”). Mesa's v3d driver, which serves the Pi 4, 5, 500 and 500+, is documented to reach OpenGL 3.1 — enough on paper — but we have not confirmed on real hardware that an unversioned context lands on that path rather than an older one. The --version and --selftest command-line checks do not touch the GPU and are expected to work regardless.

  • Raspberry Pi 5, Raspberry Pi 500 and Raspberry Pi 500+ — graphics likely supported: all three share the Broadcom BCM2712 chip and its VideoCore VII GPU, served by Mesa's v3d driver — unconfirmed on real hardware.
  • Raspberry Pi 4 — graphics likely supported: Broadcom BCM2711, VideoCore VI, also served by Mesa's v3d driver — unconfirmed on real hardware.
  • Raspberry Pi 3 and earlier — cannot run the interface. Their VideoCore IV GPU is served by Mesa's older vc4 driver, documented to expose OpenGL 2.1 at most — a full major version short of the OpenGL 3.0 the interface asks for. This build is not offered for them.
Android

The same source, built for arm64 Android and offered as a sideloadable APK — there is no Play listing yet and the application checks for updates on Windows only, so this page is the only place a newer build is announced. arm64 is an ABI we have never run on real hardware; an aircraft or ship decoder that has flown on a B200 for months has never touched a phone's radio stack, a battery, or Android's own scheduler, and a tablet or handset is expected to surface faults the desktop build never could. That is the point of sideloading it rather than waiting for a store listing: a crash or freeze report from an arm64 device is new information, not a sign the release is broken.

To install it: download the APK below, then allow installs from unknown sources — Android blocks anything from outside the Play Store by default, so open the downloaded file and accept the prompt for your browser or file manager (named Install unknown apps on current Android, the same switch under its older name). There is no separate driver step; the application talks to a USB SDR through Android's own USB host APIs once you grant it permission for the device.

Every file, with its checksum

Check the SHA-256 against the file if you would rather be sure than trust a warning. Linux and Raspberry Pi stay on the verified 0.99.103 builds while Windows is on 0.99.109.

foxsdr-setup-0.99.109.exeWindows x64 · 43.0 MB · not signedb1149b4d8034d5d6b1e29aa22fd5a8e0bd29b15097e39b51cd71b846a67997f2
FoxSDR-0.99.103-x86_64.AppImageLinux x86-64 · 8.9 MBeb6cd97cbba742b8c1bc41f9a1849710f3efbfbd5134108175189f4a82ebbf3d
foxsdr-0.99.103-linux-x64.tar.gzLinux x86-64 · 8.6 MB0f33b9acdf77f23483c64049714b06dd9f574fb04ccc1944a8733b91f838d2b4
FoxSDR-0.99.103-aarch64.AppImageRaspberry Pi 4, 5, 500 (64-bit) · 8.4 MBb287c90a438e7039d74446617abce2f3a539aa16f772ba258537bc727ca90c14
foxsdr-0.99.103-linux-arm64.tar.gzRaspberry Pi 4, 5, 500 (64-bit) · 8.1 MBed52b4082b3891933356397aa98e48900e2d1f11aeee8ff62cbe5b5cb20a5c0a
FoxSDR-0.98.1-android.4.apkAndroid arm64 alpha · 6.7 MB97b117700a52c63ed1cbf0506814d9bd8ded64e2a11890488323068af0410ce8

Raspberry Pi 3 and earlier cannot run the interface and are not offered this build. Neither the Linux nor the Raspberry Pi build has yet driven a real radio. The full install notes for each are on the detailed page.

The Legacy window

One download gives you FoxSDR with two windows. The new window is the one that starts by default. The previous look of FoxSDR, called Legacy, is included in the same install and has its own entry in the Start menu, for anyone who prefers it. It is the same program underneath, with the same version and the same updates.

The new controls of 0.99.109 were built in the new window.

Free for hobbyists

Amateur radio, students, charities, schools and public bodies can use it free under the PolyForm Noncommercial License 1.0.0.

Read the licence →

Using it in a business?

Business use, resale, bundling or building products on it needs a commercial licence.

Commercial licence →

On a Mac?

There is no Mac download yet, but there are notes on building it yourself.

Building on macOS →